![background image](http://html1.mh-extra.com/html/mitsubishi/vs-sh10u/vs-sh10u_setup-and-installation-manual_1809617044.webp)
First edition
44
LAMP WILL BE CHANGED
AFTER 5 MIN
4.6. Information display
4.6.1. Warning
message
The lamp changer can notice the indication to call service person and the pre-announcement of
lamp exchanging. It can be set from the 3 types as below in WARNING in LAMP PARAMETER in
service menu (refer to “Service menu” on page 20).
OFF: Nothing to display on the screen.
TYPE 1: Display only the indication to call service person
TYPE 2: Display both indications to call service person and the pre-announcement of lamp
exchanging.
[The indication to call service person]
The indication blinks every 15 seconds when some errors occur and
it is required to call service person.
[The pre-announcement of lamp exchanging]
This message is displayed when the lamp is brown-out. It counts
down from 5 to 0, then starts lamp exchanging.
4.6.2. Operation time and error indication
It can display error information and projector operating time at error detection in service menu
(refer to “Service menu” on page 20). Last couple of error information is indicated.
4.7. Lamp exchanging time
If it fails lamp ignition, it retries till 6 times at start-up and 2 times in the middle of normal
operation.
It takes several tens of seconds from projector turning on to lamp turning on.
In the case of lamp ignition failure, it retries after 55 seconds interval according to the
specification that lamp manufacturer recommends.
The time of lamp off
Almost recover the luminance
At lamp brown-out
50 sec to 2 min 40 sec
1 min 20 sec to3 min 10 sec
At lamp burn-out
2 min 40 sec to4 min 30 sec
3 min 10 sec to5 min
Summary of Contents for VS-SH10U
Page 1: ...DLPTM Projector VS SH10U Set up and Installation Manual August 30 2002...
Page 8: ...First edition 8 1 2 Outline drawings 1 2 1 Circuit Box unit mm...
Page 9: ...VS SH10U Set up and Installation Manual 9 1 2 2 Optical Unit unit mm...
Page 56: ...First edition 56 6 2 6 axis adjuster Model Screw holes VS SH10U c e h j...