![background image](http://html1.mh-extra.com/html/mitsubishi/vs-sh10u/vs-sh10u_setup-and-installation-manual_1809617048.webp)
First edition
48
5.6.2. NP
(Picture
Mute)
Function: To control picture mute. The projector accepts this command even in the stand-by
mode. If the projector receives NP command in stand-by mode, it automatically
executes it after start-up process. The picture mute status is cancelled by executing
[vP0] command or turning off the main power.
Format:
ID
NP [
Mute
]
Mute on/off control
0
Mute cancel
1
Mute
Mute
Omitted
Returning current mode
Response:
ID
NP
mute
Current mute status. The projector does not respond to the mute caused
by no signal.
0
Mute cancel
mute
1
Mute status
5.6.3. i (Input
Select)
Function: To select display input port. It is only available in steady state.
Format:
ID
i
[
Sel
]
Select input port
0
Analog input
1
Digital input
Sel
Omitted
Returning current setting value.
Response:
ID
i
sel
selected current input port
0
Analog input
sel
1
Digital input
5.6.4. iE
(Input Port Save)
Function: To save current input port selection. On next start up, the input port is set according to
the saved data. If you change input port selection by remote control, the status is
automatically saved. It is only available in steady state.
Format:
ID
iE
Response:
ID
iE
Summary of Contents for VS-SH10U
Page 1: ...DLPTM Projector VS SH10U Set up and Installation Manual August 30 2002...
Page 8: ...First edition 8 1 2 Outline drawings 1 2 1 Circuit Box unit mm...
Page 9: ...VS SH10U Set up and Installation Manual 9 1 2 2 Optical Unit unit mm...
Page 56: ...First edition 56 6 2 6 axis adjuster Model Screw holes VS SH10U c e h j...