![background image](http://html1.mh-extra.com/html/mitsubishi/vs-sh10u/vs-sh10u_setup-and-installation-manual_1809617053.webp)
VS-SH10U Set-up and Installation Manual
53
5.6.15. ST3
(Set Timer Value)
Function: To get set timer value.
Format:
ID
ST3
Response:
ID
ST3
time
Indicate set timer value with HEX6 bytes ASCII code.
time
000000 – ffffff
Set timer value
Example:
If set timer value is 961 hours,
ID ST3 0003c1 ¥r
(“¥r” stands for a CR code (0Dh))
5.6.16. STR1
(Lamp Timer Reset)
Function: To reset lamp timer value.
Format:
ID
STR1
Response:
ID
STR1
5.6.17. STR2
(Mt Bit Reset)
Function: To reset mt bit in ST1 command. “Info: time” parameter in MT command is also reset at
the same time.
Format:
ID
STR2
Response:
ID
STR2
Summary of Contents for VS-SH10U
Page 1: ...DLPTM Projector VS SH10U Set up and Installation Manual August 30 2002...
Page 8: ...First edition 8 1 2 Outline drawings 1 2 1 Circuit Box unit mm...
Page 9: ...VS SH10U Set up and Installation Manual 9 1 2 2 Optical Unit unit mm...
Page 56: ...First edition 56 6 2 6 axis adjuster Model Screw holes VS SH10U c e h j...