35
Part III : Setup
Channel Menu: Antenna, Channel, Memory, Name, and SQV™
SQV (Super Quick View™)
Using The Menu Screen
(Figure 1)
SQV (Super Quick View™) allows you to put
together a list of your favorite channels from
Ant-A and Ant-B. You can store up to 6 chan-
nels in each of the 9 different memory banks.
Once you have added a channel to the SQV
memory, “SQV ” will appear under the chan-
nel number on the TV screen.
SQV (Super Quick View™)
Using The Remote control
Viewing and changing SQV banks using the
remote control:
1
Press the SQV button.
2
To change memory banks, press a
number button within 5 seconds of press-
ing the SQV button.
3
Press the SQV button repeatedly to cycle
through the channels available in that
bank.
Adding SQV channels using the remote
control:
1
Use the CHANNEL or number buttons to
select the channel you want to add to the
current SQV memory bank.
2
Press and hold the SQV button for about 3
seconds. When “SQV ” and the memory
bank number appear under the channel
number, the channel has successfully
been added.
Removing SQV channels using the remote
control:
1
Press the SQV button repeatedly until you
see the desired channel.
2
While the channel number and SQV indi-
cator are still displayed on the screen,
press the CANCEL button. If the CANCEL
button is not pressed before the SQV
indicator disappears, the channel will not
be removed.
3
When the SQV indicator disappears, the
channel has successfully been removed.
Antenna, Channel, Memory
, Name, and SQV™
Figure 1.
Channel Menu
Antenna
(Figure 1)
Select Ant-A, or Ant-B. For each antenna,
you can add or delete channels in memory,
name channels, and add channels to the
SQV (Super QuickView™) list.
Channel
(Figure 1)
Select the channel you want to add or delete
from memory, name, or add to the SQV
(Super Quick View™) list.
Memory
(Figure 1)
After all available channels have been
memorized with
Memorize Channels, page
33, weaker channels viewed with Ant-A or
Ant-B can be added and unwanted channels
can be deleted.
Use the CHANNEL button on the remote
control to view memorized channels.
Name
(Figure 1)
Channels shown on Ant-A or Ant-B can be
given names (up to four characters). Select
the character by using
{
or
}
button, and
press ENTER. To cancel the character, press
CANCEL. After you enter a name, it will
appear on the TV screen, next to the channel
number.
