background image

38

Part III : Setup

V-Chip Lock Menu: V-Chip Lock Hours/Time

V

-Chip Lock Hours/T

ime

V-Chip Lock Hours/Time

(Figure 1)

V-Chip Lock Hours/Time will allow you to
activate the V-Chip or lock the entire TV
during specific hours.

V-Chip Start Time and V-Chip Stop Time

(Figure 2)

Select when you would like the V-Chip to be
Active. By setting the V-Chip Start Time and
V-Chip Stop Time to the same time, the V-
Chip will be active 24 hours a day.

Press 

{

 or 

}

 to slowly adjust the time.

Press and hold 

{

 or 

}

 to quickly adjust the

time.

Lock by Time, Lock Time, and Unlock Time

(Figure 2)

Lock by Time locks all channels and inputs
based upon the Lock Time and Unlock Time.
You must input your 4-digit passcode to
enable the TV when it is locked. By setting
the Lock Time and Unlock Time to the same
time, the Lock by Time will be active 24 hours
a day.

Passcode Screen

(Figure 3)

To view a V-Chip blocked program or to
watch the TV during a scheduled lock time,
you must enter your 4-digit passcode.

Figure 2.

Passcode Screen

Figure 1.

V-Chip Hours/Lock by Time menu

Channel 007 is locked
V-Chip locked the program
because the rating is
TV - PG DLSV.
To watch the program, enter 

 your

  

passcode.

Use  the  NUMBER  buttons.
then  press  ENTER.

- - - -

If you forget your four-digit passcode,
see 

Appendix A, page 57.

Summary of Contents for WD-65000








































































Reviews: