8
5. OPERATION ILLUSTRATION
1
.
Connect the speakers:
Constant
voltage
speaker
not to exceed 120 Watts
total wattage of all speakers combined.
selector switch
is in the 70V
position, as shown below:
①
When the 70V / 4-16Ω
②
is in the
When the
7 0V
and 4-16
Ω
selector switch
4-16
Ω
position, as shown below:
Fixed resistance speaker: 4-16Ω
Note:
1.
Before connecting the speakers, please make sure that the equipment is powered off
to avoid
the
risk of electric shock.
2.
During the installation of speakers, please make sure that the sum of the rated input power
of the
speakers to be connected is less than
120 watts.
2.Connect external devices
①
Please ensure that the equipment and all equipment will be connected
is
powered off.
②
Using the corresponding cable to connect this equipment and other external equipment.
:
3.Connect the power line and turn it on:
· Please make sure that the power switch of the Mixer/Amp and its connected equipment are
turned off.
· Turn the volume knob to the left.
· Connect the supplied power line to the AC IN interface
· Plug the power line into the AC socket.
· Turn on the connected equipment (music source, etc.), and then turn on the Mixer/Amp.
Note:
1.
Before powering on, please check and make sure there is no problem with the cable and connection.
2.
When you turn off the system, turn off the
Mixer/Amp
, and then turn off the connected equipment.
4-16
Ω
100V
OUTPUT
100V/4-16
Ω
NC
NC
SPK-
SPK+
4-16
Ω
100V
OUTPUT
100V/4-16
Ω
NC
NC
SPK-
SPK+
