10
Connectivity Test:
Step 1:
Verify the power switch on the right side of the unit is set to ON.
Step 2:
On the LCD menu verify unit has a valid IP, subnet and gateway.
IP
010.001.001.206
Subnet
255.255.255.128
Gateway
010.001.001.120
Step 3:
On the LCD menu go to “
Press UP Arrow To Callback
” and press the UP ARROW.
Press UP Arrow
To Callback
Step 4:
The LCD will display “
Forcing Connect Please Wait
”
Forcing Connect
Please Wait
Step 5:
If there is a Connect-Back record waiting for the unit then the LCD will display “
ACTIVE CONNECT
XXX.XXX.XXX.XXX
”.
ACTIVE CONNECT
10.1.1.171
If there is no record waiting then it will display “
CONNECTING TO XXX.XXX.XXX.XXX
” for a few
moments on the LCD to confirm a successful connectivity.
CONNECTNG TO
10.1.1.171
Example:
Example:
Example:
