Edge 2 – User Manual
MIXTILE
- 9 -
V1.3
Copyright
©
2022 MIXTILE.
1.5 Key Component Specifications
The key component specifications are described below with relevant hardware information and
developing notices. For more information, pin assignments and signal descriptions are listed in
Chapter 2, Connectors & Pin Assignments.
1.5.1 MIXTILE Core 3568
The Core 3568 is a System-on-Module that expands all CPU functions to pins with an innovative
connector. The Rockchip RK3568 ARM64 CPU contains many peripherals to support multi-purpose.
Quad Cortex-A55 processing cores
Core operating frequencies up to 2.0GHz
Neural Process Unit with processing performance up to 0.8 TOPS
Support 4k@60fps H.265/H.264/VP9 decoder; 1080P@100fps H.265/H.264 encoder
LPDDR4 SDRAM supports up to 8GB
The SDRAM is 32bits data width, 4 ranks LPDDR4 memory capacities from 2GBytes to 8GBytes. The
system flash memory supports eMMC 5.1 memory capacities from 16GBytes to 256GBytes. The
default memory setting is 2/4GBytes LPDDR4 and 16/32GBytes eMMC for Edge 2.
1.5.2 Wi-Fi 6 / Bluetooth
Edge 2 integrates a Wi-Fi and Bluetooth module AP6275S, that can wake up the device from sleep
mode. AP6275S supports Wi-Fi 6 and dual-mode Bluetooth 5.0 that could interact with different
vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points with MIMO standard and can accomplish up to a
speed of 1200Mbps with the dual stream. Wi-Fi wake and enable signals connect to
GPIO0 in the
processor, which can be operating while the device is sleep.
WiFi-BT Module Architecture
