C
M
J
CM
MJ
CJ
CMJ
N
vibe-watermark-bright.pdf 03/04/2009 16:07:52
vibe-watermark-bright.pdf 03/04/2009 16:07:52
10 Troubleshooting
The audio tracks are not playing back
•
Make sure you selected the correct audio interface in the audio preferences window.
•
Make sure you activated the correct audio inputs and outputs of your audio interface in the audio
preferences window.
•
Make sure you selected the correct Routing Mode in the audio preferences window.
•
Make sure that your control records/discs have been properly calibrated in the vinyl/CD preferences
window.
There is no sound from speakers
•
Check for activity on the output meter of the internal mixer. If there is no response from the meter, check
all the controls of the mixer: faders, gain, kills, etc.
•
If you are in external mixer mode, check your connections from your audio interface to your mixer and
from your mixer to your sound system. Make sure you have the proper inputs selected on your mixer.
The time code quality is bad
•
Check for proper connections of your turntables’ ground wires.
•
Make sure your needles are clean and not damaged.
•
Make sure there is no dust on your records and needles.
•
Make sure your cables are in good condition. Troubleshoot by using a different cable.
•
Make sure your decks are properly connected to your audio interface.
•
Make sure the right and left channels are not inverted.
•
Make sure your record is not scratched.
20 /
21
Summary of Contents for Cross Pack
Page 1: ...Quick Start Guide ...
