MFP250 / 400 / 800
Initial Start Up
76609594EN-MFP-NH-V2.0.docx 26/40
4.1.6
Connecting Locking Cylinder (Pincers only)
Filtered, oil-free compressed air with a pressure of 6 bar is required for operating the
MFP motor pincers.
Deactivate the compressed air when connecting the plug-in hoses.
Caution
Fig. 16: Pneumatic connection of locking cylinder (typical)
Connect the compressed air connections of the locking cylinder with the respective
connections.
4.1.7
Connecting Stroke Cylinder
Filtered, oil-free compressed air with a pressure of 6 bar is required for the stroke
cylinder.
Deactivate the compressed air when connecting the plug-in hoses.
Caution
Fig. 17: Pneumatic connection of stroke cylinder (typical)
Connect the compressed air connections of the stroke cylinder with the respective
connections.