IS-120B
1. Special Precautions
1-1
Denotes operations and practices that
may result in personal injury or damage
to the equipment if not correctly followed.
1. Special Precautions
(1) Safety Precautions
Before using, read "Safety precautions"
carefully to understand the correct
method of use.
•
These precautions are shown for safe
use of our products and for prevention
of damage or injury to operators or
others. Be sure to read each of
them, since all of them are important
for safety.
•
The meaning of the words and
symbols
is as follows.
Do not touch the inside of the Power Supply unnecessarily.
Since very high voltages are applied to the inside of this Power Supply, it is
very dangerous to touch it unnecessarily. You may touch it only when you
replace the fuse or battery.
When inspecting the interior of the Power Supply, be sure to turn off the
power source of the Power Supply and wait for at least 5 minutes.
Never disassemble, repair or modify the Power Supply.
These actions can cause electric shock and fire. Do not do anything other
than the maintenance described in the operation manual.
Denotes operations and practices
that may imminently result in serious
injury or loss of life if not correctly
followed.
DANGER
!
Denotes operations and practices
that may result in serious injury or
loss of life if not correctly followed.
WARNING
!
These symbols denote
"prohibition". They are
warnings about actions out
of the scope of the warranty
of the product.
These symbols denote
actions which operators
must take.
Each symbol with a triangle
denotes that the content
gives DANGER, WARNING
or CAUTION to the operator.
!
DANGER
!
CAUTION
！
