A
A
Bugs 12EIS User Manual
Attach the propellers
Detach the propellers
A
Select two corresponding propellers, (A and A, B and B), install into the propeller clamp. (as pic. 1)
Then insert copper cover to propeller clamp (as pic. 2), Using screwdriver to fix the screws clockwise.
(as Pic.3)
Pic. 1
A
Pic. 2
Pic. 3
Attach and Detach the Propellers
!
● Please make sure that the clockwise and the counter-clockwise propellers are installed on
the correct motors, because the aircraft will not fly normally for wrong propellers installation.
● Be aware of the sharp edges of the propellers. Handle with care.
●
ONLY
use the factory approved propellers.
DO NOT
mix propellers types.
● Stand clear of the motors and
DO NOT
touch the propellers when they are spinning.
● Check that the propellers and motors are installed correctly and firmly before every flight.
● Ensure that all propellers are in good condition before each flight.
DO NOT
use aged,
chipped, or broken propellers.
● To avoid injury,
STAND CLEAR
of and
DO NOT
touch propellers or motors when they are
spinning.
●
ONLY
use designated propellers for a better and safer flight experience.
Using screwdriver turn anti-clockwise, take out 2 screws and then 2 copper cover (as pic.4-5),
Disassemble the propeller. (as pic.6)
Pic. 5
Pic. 6
Pic. 4
-11-
