MK-660
Revision 01/02, Effective Date January 10, 2002
Page 16
SETUP, ADJUSTMENT and OPERATION
SETUP:
1. Pre-start Inspection:
Prior to beginning work, a pre-start inspection of the saw should be preformed.
2. Connecting the Water Pump:
1.
To prevent the possibility electrical shock, the MK-660 MUST be de-energized when
connecting the Water Pump.
2.
To prevent the possibility of electrical shock, use only MK Diamond qualified replacement
parts
NOTE: To prevent pump damage, the Water Pump must be disconnected if cutting with a Dry Blade.
(A)
Ensure the ON/OFF Switch
is in the OFF position
(B)
Verify the Movable Cutting
Table moves freely
(C)
Inspect the Diamond Blade for
damage – verify the blade is
correct for the material being cut
(D)
Inspect the Pump Assembly for
damage – ensure the cord is
free of cracks or cuts
(E)
Inspect the MK-660 for
damage – ensure the cord is
free of cracks or cuts
Press
together
Verify ease of movement
(See Maintenance section
if problems exist)
Inspect for
damage
Inspect for
damage
Inspect for
cracks or cuts
Off
Position
(A)
Connect the Cooling Transfer
Tube to the inlet connection of
the Blade Guard
(B)
Connect the Water Pump power
cord to the connection found on
the back of the motor
Press on
Pump
Connection
ON/OFF
Switch
Inspect for cracks,
de-bonding, etc.
Cooling
Transfer
Tube
Inlet
connection
