Camera system
messtechnik
EMC Test and Measuring Systems
mk
Extended Manual
then displays them. (e.g. frequency and field strength for EMC measurements).
4.3.8.1 Permanent On-Screen Display
The permanent display can be used to display the current date, the current time and up to four user definable text
lines, independent of external software. This permanent display can be defined separately for each channel and is
displayed immediately after switching on the receiver.
4.3.8.2 Selecting Display Channels
Figure 4-15: Available output channels
Select the output channels, on which the permanent text shall be displayed.
4.3.8.3 Functions
In column
[1]
you can specify a font size for each text component (text line, time, date). Possible font sizes range
from „small“ to „large“, the value „none“ means that this component will not be displayed.
The columns
[2]
and
[3]
define the position of the text to be displayed, in coordinates of the first character
(depending on the font size) with the origin in the upper left corner of the screen.
Column
[4]
defines the foreground color (font color) of the text, column
[5]
the background color.
Enter the text to be displayed in the input field
[6]
. These texts can be max. 31 characters long.
If the check mark is set at
[7]
, the screen is cleared before the first writing.
Buttons
[8]
sends the configuration to the receiver, where it is displayed immerdiately. The configuration is NOT
stored in the receiver permanently, to do this, you have to click on button „Write“
[
16]
.
You can configure the position and font size for the battery messages with the settings
[9]
, the colors and texts
with the fields
[10]
. Button
[11]
sends the configuration to the receiver. The configuration is NOT stored in the
receiver permanently, to do this, you have to click on button „Write“
[16]
.
You can use the settings
[12]
and
[13]
to configure the format of the displayed date and time either by selecting a
predefined ISO format, or by selecting each single part and seperator.
[14]
shows a preview of the selected settings.
Page 26 / 43
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
