Camera system
messtechnik
EMC Test and Measuring Systems
mk
Extended Manual
FG-/BG-Colour
Description
0
Transparent
1
Black
2
Red
3
Green
4
Blue
5
Yellow
6
Violett
7
Turquoise
8
Dark gray
9
Gray 2
10
Gray 3
11
Gray 4
12
Gray 5
13
Gray 6
14
Bright gray
15
White
Table 5-11: FG-/BG-Colours
5.4.3 Synchronisation of Time and Date with External Sources
Time and date can be synchronized with an external source as follows:
•
use the network time protocol (NTP). Requires optional LAN interface. Refer to chapter 4.3.9.4 how to
configure this function.
•
send MX:TIME and MX:DATE (see table 5-6) from an external source (such as EMC PC).
Following interval for sending MX:TIME and MX:DATE is recommended:
•
Options "
real-time clock without battery
" and "
no real-time clock
": send MX:TIME and MX:DATE on each start
of the receiver. After that, send MX:TIME cyclically depending on the required accuracy. Option "
real time
clock"
provides an accuracy of up to 5ppm, otherwise a deviation of up to 2% can occur.
Send MX:DATE only when you change time from one day to another.
•
Option "
real-time clock with battery
": the internal controller updates time and date also when turned off.
Send MX:TIME and MX:DATE only when receiver and external source have run out of sync.
Recent receivers always combine option "OSD" with option "real-time clock with battery".
5.4.4 Examples
MX:TIME 250 13 5 1
Sets the time of the internal controller to
13h 5m 1s
.
OSD:PTIME 2 0 1 3 4 14 2
Displays the time of the internal controller on channel 2 with text size=1, position x=3, y=4, foreground colour=14
Page 40 / 43
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
