29
(D)
Install Fuel Cap
DO NOT over-tighten.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.
Damage caused by spilled fuel IS NOT covered under the warranty.
2. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
3. A ladder meeting OSHA specification is recommended.
4. Use unleaded gasoline with a pump octane rating of 86 or higher.
(C)
Fill Fuel Tank until level is
below throat.
(B)
Check Fuel Level (If level is 1/2
full or greater, go to step D.
(A)
Remove Fuel Cap.
NOTe:
(A)
Level Cutting Head.
(B)
Remove Dipstick.
(C)
Check Oil Level.
1. See Engine Manual for capacity.
2. When installing the Oil Dipstick, ensure the threads are aligned with the threads of
the Oil Reservoir so as not to “cross-thread.”
Checking Oil Level
NOTe:
MK-5000G MaiNTeNaNCe
