37
Blade Will Not Cut Properly
(A)
Check for smoothness
or “glazing”.
(B)
Check for proper rotation.
(C)
Ensure Blade Core not bent.
engine stops
The Engine is equipped with an oil level sensor that will stop the engine on a low oil level
NOTe:
(A)
Pull Starter Cord straight back
in a smooth fast motion.
(B)
Verify fuel level is below the
throat of the Fuel Tank.
(C)
Check for proper oil level.
(See Maintenance section if low)
(D)
Clean and readjust engine
Spark Plug. (See Spark Plug
Adjustment and Replacement)
MK-5000G TrOUBLesHOOTiNG
