background image

SS-150THX satellite speaker

page 10

sound takes on the character described above.

When tone controls or equalizers are used to boost frequencies, the problem occurs much more rapidly.  Even

a small boost of low or high frequencies can easily double the power requirement and lead to amplifier clipping at
moderate levels.  Therefore, you should use your tone controls judiciously, avoiding extreme boosts of the bass and
treble controls, especially when you are listening at high volume levels.

The best way to avoid speaker damage is to use common sense.  Use moderate boosts of tone controls or

equalizers, at the very most.  Listen carefully for any harshness and break-up, especially at high volume levels, and
turn down the volume when needed.  If you cannot get enough volume, you may need to consider a higher-powered
amplifier.  If you have any questions about this, please contact M&K, and we will be happy to discuss it with you further.

10. IF YOU NEED SERVICE

Contact your dealer or M&K with a complete description of the problem.  Please have the unit's model and serial

numbers (found on the back of the cabinet), date of purchase, and your dealer's name.  You can call M&K between
8:30 AM and 5:00 PM Pacific Time, Monday through Friday, at (310) 204-2854.  If you call outside these hours, leave
a message, and we will return your call.

DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR

SERVICE WITHOUT OBTAINING PRIOR AUTHORIZATION.

Your SS-500THX speakers carry a five year limited parts and labor warranty. This warranty is transferable to

new owners.  It does not cover abuse, misuse, repairs by unauthorized service stations, speakers without  serial
numbers, and those damaged in shipping or by accident.  If you have warranty questions, please contact M&K.

11. SPECIFICATIONS

IMPEDANCE:

4 ohms

MINIMUM POWER:

10 watts RMS

RECOMMENDED POWER:

50 watts RMS to 200 watts RMS

MAXIMUM POWER:

200 watts RMS unclipped peaks

FREQUENCY RESPONSE:

8

0

 Hz

 - 20 KHz (high frequencies above 8 KHz are not rolled off)

12. CABINET MAINTENANCE

Treat the cabinet as you would any piece of fine furniture.  Its painted black or white finish does not require any

special maintenance;  regular dusting with a lint-free cloth and periodic cleaning is all that is required.  Matching paint
can be used if necessary to repair any surface damage.

13.  USE WITH OMNIMOUNT

®

 BRACKETS

The SS-150

THX

 contains a threaded (3/8") insert, located on the speaker's back baffle.  This allows the speaker

to be securely fastened to wall-mount brackets offered by Omnimount Systems.  The appropriate bracket is a special
order part of the 50 series, known as the 53-RST.  This part (order the 53-RST) is available from M&K Sound.

For more information, including alternate mounting configurations such as ceiling mounts, contact Omnimount

Summary of Contents for SS-150THX













Reviews: