background image

12. CABINET MAINTENANCE

Treat the cabinet as you would any piece of fine furniture. Its painted black or white finish does not require

any special maintenance; regular dusting with a lint-free cloth and periodic cleaning is all that is required.
Matching paint can be used if necessary to repair any surface damage.

13. SPECIFICATIONS

CS-150

IMPEDANCE:

4 ohms 

MINIMUM POWER:

10 watts RMS

RECOMMENDED POWER:

25 watts RMS to 200 watts RMS

MAXIMUM POWER:

200 watts RMS unclipped peaks

FREQUENCY RESPONSE:

80 - 20 kHz ± 3dB

CABINET DIMENSIONS:

39.94˝ x 7.4˝ x 4˝ (HWD)

BASE DIMENSIONS:

0.75˝ x 9.1˝ x 8˝ (HWD)

WEIGHT:

21 lbs.

CS-35

IMPEDANCE:

4 ohms 

MINIMUM POWER:

10 watts RMS

RECOMMENDED POWER:

25 watts RMS to 200 watts RMS

MAXIMUM POWER:

200 watts RMS unclipped peaks

FREQUENCY RESPONSE:

70 - 23 kHz ± 3dB

CABINET DIMENSIONS:

34.5˝ x 8.9˝ x 4.2˝ (HWD)

BASE DIMENSIONS:

0.75˝ x 10.75˝ x 10˝ (HWD)

WEIGHT:

24 lbs.

CS-29

IMPEDANCE:

4 ohms 

MINIMUM POWER:

10 watts RMS

RECOMMENDED POWER:

25 watts RMS to 200 watts RMS

MAXIMUM POWER:

200 watts RMS unclipped peaks

FREQUENCY RESPONSE:

70 - 23 kHz ± 3dB

CABINET DIMENSIONS:

29.3˝ x 8.9˝ x 4.2˝ (HWD)

BASE DIMENSIONS:

0.75˝ x 10.75˝ x 10˝ (HWD)

WEIGHT:

22 lbs.

CS-22

IMPEDANCE:

4 ohms 

MINIMUM POWER:

10 watts RMS

RECOMMENDED POWER:

25 watts RMS to 200 watts RMS

MAXIMUM POWER:

200 watts RMS unclipped peaks

FREQUENCY RESPONSE:

70 - 23 kHz ± 3dB

CABINET DIMENSIONS:

21.75˝ x 8.9˝ x 4.2˝ (HWD)

BASE DIMENSIONS:

0.75˝ x 10.75˝ x 10˝ (HWD)

WEIGHT:

19 lbs.

CS150/CS35/CS29/CS22 column manual.qrk

09/03/02       rev.1      pt/qrk

PN: 70040

12

COLUMN SURROUND SPEAKER

Summary of Contents for Tripole CS-150













Reviews: