9
1 In the control settings, you can set the left and right hand throttle, restart the APP after the
change to view the modification result;
2 Click
“
Calibrate Accelerometer
”
and follow the prompts to calibrate the accelerometer;
3 Click
“
Calibrate Remote Control
”
, then move the left and right joysticks and gimbal tilt,
gimbal heading, gimbal zoom wheel to get the maximum and minimum values of each channel,
and then complete the remote channel calibration according to the prompts
；
4 After the
“
Calibration Remote Control
”
is completed, enter the status display interface to
confirm whether all the remote control channel values are normal. It is recommended to calibrate
the remote control at least once every 1 month to prevent the channel value changing due to
mechanical wear and deformation.
Summary of Contents for Etlas Mobile
Page 1: ......
Page 8: ...7 Figure 9 route mode drop down box...
Page 11: ...10 Figure 11 Flight Setup Interface Figure 12 Controls Setting Interface...
Page 16: ...1414...
