Skylle 1550 User Manual 20181107V2
|30
24
/
31
TASK MANAGEMENT
1.
Long press the screen after you complete all the needed settings. Select “mission” and click “send to vehicle”, clicking
Sync
to send the mission to the UAS. Then you could ascend the UAS (after 15 meters above the ground), and switch
the “auto flight mode” stick in RC.
Clicking “Photo” during the flight, will send the command to the drone and drone will capture an image accordingly.
Sync
Accessibility
2.
The mission can be downloaded from the drone.
After long pressing the screen, click “Mission
Check” and download from the drone.
Or go into Sync
, click “Load From Vehicle”
to receive the last flight mission set on the
drone.
3 Clicking Sync
, click “Delete All” to delete route.
4. When the flight is over, click on Sync
, or long
press anywhere on map, then click “Task”, to save
the file. Select the save path and file name, then
click Save.
If you want to perform the same mission next
time, click on “Load from File”. Then send the
mission to the drone, and the aircraft will perform
the loaded mission.
Mission Check
Task