8
4. OPERATING
During use, keep the heater at a safety distance
at least one meter from inflammable objects
(e.g. curtains) and from walls.
Make sure that the heater turns her rays in the area you
want to heat. It is possible to change the angle of inclina-
tion of the movable part of about 35° to take advantage
of a comfortable source of heat coming from below (eg.
during drying after taking a shower).
Turn the heater on and off by pressing the ON / OFF
switch at the bottom. The switch has three positions:
•
0 = Off.
•
I = On without oscillation.
•
II = On with oscillation.
The appliance is equipped with a remote control with two
buttons that can be activated when the ON / OFF switch
is in position II:
•
Left button = On / Off.
•
Right button = Oscillation / Standing.
Do not stop oscillation in progress or give forced oscilla-
tion during operation of the appliance.
Should it fall, a switch positioned under the base will au-
tomatically turn off the appliance: correct operation of the
switch is conditioned by the evenness of the surface it is
placed on.
Do not use the heater on uneven surfaces and
on carpets with long fibres
.
When the appliance is operating:
•
Do not hang combustible objects on it, such a s table
cloths etc.
•
Do not use it near inflammable objects or surfaces that
obstruct it.
•
Do not insert metal objects, such as needles, iron
wires etc.
•
Do not use it to warm domestic animals.
Do not use this heater with a programmer, timer
or any other device that switches the heater on
automatically, since a fire risk exists if the heater
is covered or positioned incorrectly.
ON/OFF switch
Distance from surfaces
Remote control
ON/OFF button
“Oscillation” button
1 m
1 m
1 m
1 m
1 m
