CAUTION:
The wheelchair may start to move during the test.
1
Activate the wheelchair operating system.
2
Check for any error message.
TROUBLE:
for more information on the error messages, see
Joystick Connection on page 35
and
3
Move the joystick slowly forward until you hear the parking breaks
switch off.
4
Immediately release the joystick. You should hear the parking break
react within a few seconds.
5
Repeat 3 and 4 three times, while slowly moving the joystick towards
you, to the left and to the right.
6
Check whether the power on/off (pwr) and mode (in) switch function
properly.
Test drive
Do a test drive with the wheelchair.
1
Check whether the wheelchair and all its functionalities function
correctly in all positions the user may use the joystick and switches.
2
Check whether cables or parts may not get damaged or hindered in any
possible position of the wheelchair.
29
All-round Joystick (Light) Installation Manual 29
