R-net parameters
Some R-net parameters need to be set for correct usage of the mo-vis R-net
joysticks. For this we refer to the
Curtiss-Wright manual SK77981-14 | R-net
Technical Manual | Chapter 3 - Progamming
R-net (Ch. 3 - 4.4):
Profile Management
>
Input Device Type
:
•
In most cases, this parameter needs to be set to Universal for all mo-vis
joysticks.
•
In combination with certain other devices (e.g. Scoot Control), it is
advised to set this parameter to JSM. Please refer to the
Installation
manual
of the other devices for more information.
NOTE:
If you have several input devices of the same type, please
refer to the
Curtiss-Wright manual SK77981-14 | R-net Technical
Manual | Chapter 3 - Programming
to install as
Input Device
Subtype
.
R-net (Ch. 3 - 7.5):
Controls
>
Global
>
Profile Button
: the default setting
of this parameter is Profiles. If you want access to the modes for control of
other wheelchair functionalities, such as seating positions, etc., then you
have to select Profiles/Modes.
LED status
The illumination of the LED on the joystick interface indicates the operational
status of the joystick.
44
44 All-round Joystick (Light) Installation Manual
