STEP 9b
Attach the velcro square on the inside-top and bottom edge of the
graphic
4
to the velcro square on the
outside of the base and top of the frame (Figure A). This will help keep the graphic in place as you wrap
the graphic around the frame.
Attach the four
long bars
6
by screwing one into
each of the
threaded rods
8
.
(7a) Repeat the process from
step 2
at the top with the
remaining
L-connector bars
1,2
and
short bars
5
. Make
sure the exposed connectors are facing down and that
the outward velcro face on the
L-connector
2
is on the
same end and facing the same way as the one on the
base. (7b) Insert the assembled top into the top ends of
the
long bars
6
.
(9a) Fold the top flaps of the graphic over the top of the
frame and attach the velcro from the graphic to the
velcro on the inside of the frame. Do the same to attach
the bottom flap of the graphic to the base of the frame.
(9b) Lastly, zip up the two edges of the graphic to
complete the Bella Monument.
STEP 5
STEP 6
STEP 7a
ASSEMBLY GUIDE
BELLA MONUMENT COLUMN
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 7b
STEP 8
STEP 9a
3
6
6
3
8
6
1
2
5
5
4
4
Figure A
2
Repeat
step 4
with the remaining two
middle
bars
3
to form the middle brace of the Bella
Monument.
