Contact Grill
- English manual
4
EN
BEFORE FIRST USE
Read all instructions carefully and keep them for future reference.
1. Remove all packaging
2. Clean the Cooking Plates by wiping a sponge or cloth dampened in
warm water.
DO NOT IMMERSE THE UNIT AND DO NOT RUN WATER DIRECTLY
ON THE COOKING SURFACES.
3. Dry with a cloth or paper towel.
4. For best results, lightly coat the cooking plates with a little cooking
oil or cooking spray.
Notice: When your Contact Grill is heated for the first time, it may emit
slight smoke or odor. This is normal with many heating appliances. This
does not affect the safety of your appliance.
HOW TO USE
Before using the appliance for the first time, peel off any promotional
materials and packaging materials, and check that the cooking plates
are clean and free of dust. If necessary, wipe over with a damp cloth.
For best results, pour a teaspoon of vegetable oil on to the non-stick
plates. Spread over with an absorbent kitchen towel and wipe off any
excess oil.
PREPARING YOUR GRILL TOASTER
1. Select the plates you want to use, and to ensure that it is installed.
2. Close the Contact Grill and plug it into the wall outlet, Red power
light will be ON, Open the Timer, and set the temperature knob to
MIN, Green working light will comes on, indicating that the Grill
Toaster has begun preheating. As this time, you can be the right
Thermostat Knob to set the temperature control to your desired setting:
“MIN” for light colored food and “MAX” for darker food. At first, try a
setting in the middle . You may later adjust it lower or higher according
to your preference. Different foods will also cook up differently.
3. It will preheating approximately 3~5 minutes to reach baking
temperature, the green ready light will goes off, the Contact Grill is
ready for use.
