Mini Blender
- English manual
9
EN
CARE & MAINTENANCE
HOW TO CLEAN
CAUTION
: Make Sure that the motor base is unplugged from the power source
before inserting or removing any attachment and before cleaning.
NOTICE
: Wait until the blender has cooled down sufficiently before cleaning it.
CAUTION
: DO NOT immerse the motor base into water or any liquid, or place
into a dishwasher.
1. Separate/remove all parts from each other.
2. Clean the motor base with a slightly damp cloth and wipe dry
3. Place jars in the dishwasher. Place the lids and attachments on the top rack.
Use caution when handling the blade assemblies as the blades are very sharp.
4. Whenever possible, rinse parts immediately after processing to make cleanup
easier.
5. Store the product in a cool, dry place.
NOTE
:
You may also wash the jars by filling the jar to the Max fill line with warm water
and drop of dish washing detergent, placing the blade assembly on the jar and
pulsing a few times. Do not fill the jar more than Max fill line with water because
it will overflow. Once clean, remove the jar from the motor base. Rinse the jar,
attachment and lid under running water. Allow all the parts to dry before storing.
Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as
petrol, alcohol or acetone to clean the appliance
All detachable accessories can be cleaned in dishwasher.
Tips
:
Use a small brush(not included) to remove particles of food lodged underneath
the blades.
If some leftover particles dry onto the inside of the jar, fill the cup about 2/3 full
with warm water and attach the blade subassembly. Place the jar and blade
subassembly onto the motor base and operate the appliance for about 20-30
seconds to help loosen the stuck ingredients. Repeat the above step but use clean
tap water. Empty blender and dry thoroughly.
CAUTION
: Do not try attempt to remove blades from the Blade subassembly for
cleaning.