Milk Frother
- English manual
8
EN
CLEANING AND MAINTENANCE
Unplug from the power before cleaning, remove the lid from the jug.
Never immerse the jug or base into water!
1. The jug & base: Clean the jug immediately after each use, flush and
clean the wall with warm soapy water and non-abrasive cloth. Then dry
with a soft cloth. Clean with a soft wet cloth. Never use sharp cleaning
agents, hard nylon brush or metal brush to avoid any scratches on the
stainless steel surface. Never clean with metal object and never use
abrasives.
2. The lid: Rinse under water directly.
3. The whisks: Remove from the jug and wash with warm water. Dry
and store in a safe place in case of missing.
TROUBLE SHOOTING
Problem: Indicator light doesn’t work or jug doesn’t work
Causes: 1. Plug is not inserted properly
2. Jug and power base not connected properly
3. No power in the socket
4. Problems with electric elements
Solutions: 1. Re-insert into the power
2. Remove the jug and place again on the base
3. Check the electric circuit
4. Repair
Problem: Jug ceases to work after starting operation
Causes: 1. Jug temperature is too high
2. Jug damaged with immersion in water
Solutions: 1. Rinse cold water inside the jug to reduce the temperature
2. Repair
