MO6672
EN
Shower timers
How to use
•
There is one
“Start” button on the countdown timer, the button
controls start/stop of the timer.
•
When shower timer shows 0m00s, press
”Start” button, the
timer will reset to 5m00s, press
”Start” button again to pause
countdown.
•
During pause, press
”Start” button again to resume countdown
from the pause.
•
When the timer reaches 0m00s on the countdown display, the
alarm will be set off, and will ring for 1 minute if it is not manually
stopped.
•
When the alarm is ringing, press
”Start” to stop the alarm.
Function
•
The shower timer is splash proof only. DO NOT submerge the
timer fully in water.
•
Suction cup will only allow the item to stick on smooth surfaces.
Please lightly wet the smooth surface for a better suction result.
•
When display is dim, please change battery.
Battery specification
•
The timer included one AG10 battery.
•
To change the battery, open the battery door on the back of the
timer. The battery door can be opened with a coin, twist the
battery door in counter clockwise direction until the dot on
battery door aligns with the dot on the timer to open the battery
door.
•
Close the battery door by lining up the 2 dots to each other,
Then turn the battery door with a coin in clockwise direction to
close the battery door.
•
Make sure the battery door is closed tightly for best splash proof
function.
