Copyright © MOBA Mobile Automation Australia Pty Ltd
11
4.3.4 SCANNING FUNCTION (OPTIONAL FOR LS.RH.HP VIA REMOTE CONTROL)
Press the Scanning Angle switch to make the rotating head scan. Press the switch repeatedly to change
the angle of scanning among following angles: 0°, 10°, 45º, 90° and 180°. Press the Beam Left and Beam
Right switches to change the position of the scanning. The scanning function is used to increase visibility
of the laser beam over a specific scan angle.
4.3.5 SLOPE ADJUSTMENT (OPTIONAL FOR LS.RH.HP VIA REMOTE CONTROL)
When the instrument is set upright for horizontal rotation, the slope of the X
-
axis and Y
-
axis can be
adjusted by using manual mode. To select manual mode, press the Automatic/Manual Mode switch. When
the Mode Indicator light is on, the laser is in manual mode and will not self
-
level.
a. X
-
axis slope
Aim the X1
-
axis in the direction of the slope to be adjusted, as
depicted below:
Press the X
-
axis left or right switch to move the laser beam up or
down.
b. Y
-
axis slope
Aim the Y1
-
axis in the direction of the slope to be adjusted.
Press the Y
-
axis up or down switch to move the laser beam up or
down.
To return to automatic mode, press the Automatic/Manual Mode
switch. Automatic mode is indicated by the Mode Indicator light
switching off.
Y2
X2
Y1
X1
