background image

Copyright © MOBA Mobile Automation Australia Pty Ltd

 

 2

 

WARANTY

 

STATEMENT OF LIMITED WARRANTY

 

MOBA  Mobile  Automation  Australia  Pty  Ltd  (MOBA  Australia)  warrants  all  equipment  of  its  manufacture  to  be  free  of 
defects in material and workmanship for a period specified below. This warranty period is from the date of invoice. Items 
covered  by  this  warranty  are:  sensors,  transmitters,  electronic  levels,  receivers,  masts,  control  boxes,  displays  and 
accessories. All other components not manufactured by MOBA Australia but sold as part of the installation package, such 
as hydraulic or electrical components, hoses, fittings and clamps, will carry the original manufacturer

s warranty.

 

Warranty period:

 

Rotec laser levels: 2 years

 

Rechargeable batteries: 90 days

 

All other equipment: 1 year

 

MOBA Australia  or  its  authorised  service  centre  will  repair  or  replace,  at  its  option,  any  defective  part  or  component  of 
which notice has been given during the warranty period. A warranty registration card must be filled out properly and be on 
file with the MOBA Australia service department before warranty repair or replacement can be approved. If service in the 
field is necessary to repair machine

-

mounted equipment under warranty, MOBA Australia may authorize on

-

site repairs at 

no charge  for parts  and labour. Travel time,  accommodation  and  other  expenses  incurred to  and from the  place where 
repairs  are  made  will  be  charged  to  the  purchaser  at  the  prevailing  rates.  If  warranty  service  can  be  done  at  a  factory 
authorised service centre, the customer will pay only one

-

way freight charges.

 

Any evidence of negligence or abnormal use, accident, or an attempt to repair equipment by other than factory authorised 
personnel even when using MOBA Australia

s certified or recommended parts, automatically voids the warranty.

 

The  foregoing  states  the  entire  liability  of  MOBA  Australia  regarding  the  purchase  and  use  of  its  equipment.  MOBA 
Australia will not be held responsible for any consequential loss or damage of any kind.

 

This warranty is in lieu of all other warranties, except as set forth above, including any implied warranty of merchantability 
or  fitness  for  a  particular  purpose,  are  hereby  disclaimed.  This  warranty  is  in  lieu  of  all  other  warranties,  expressed  or 
implied.

 

Summary of Contents for ROTEC LS.RH.HP

















Reviews: