Copyright © MOBA Mobile Automation Australia Pty Ltd
8
3.3 SWITCHPAD FUNCTIONS
All models
1.
ON/OFF: turns the instrument on and off.
2.
Power indicator: lights up when the instrument is on and flashes to indicate low battery.
3.
Automatic/manual mode: switches between automatic and manual modes.
4.
Mode indicator: when this indicator is on, the instrument is in manual mode. When it flashes the
instrument is out of self
-
levelling range.
5.
Height of instrument alert (HI alert): enables the HI alert function. When activated the laser will stop
rotating if it is jolted or moved.
6.
Height of Instrument indicator (HI alert indicator): flashes slowly when HI alert is enabled. When
flashing rapidly the laser has been jolted or moved and will not self
-
level.
All models except LS.RH.HP
7.
Scanning angle: switches between 5 levels of beam scanning angle: 0, 10°, 45°, 90°, 180°
8.
Rotating head speed: selects rotating head speed: 0, 60, 120, 300, 600 RPM
9.
Beam left: moves the laser beam counter
-
clockwise, only when the unit is in 0 RPM or scan mode
10.
Beam right: moves the laser beam clockwise, only when the unit is in 0 RPM or scan mode
11.
X
-
axis: adjusts the slope of the X
-
axis when the instrument is in manual mode.
12.
Y
-
axis: adjusts the slope of the Y
-
axis, when the instrument is in manual mode.
