23
Infrared touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a control
light, a letter or a number in the
display and/or a “beep” sound.
In the case of a general use press only one key at the same time.
Starting-up
You must first switching on the hob, then the heating zone:
•
Start-up/ switch off the hob :
Action
Control panel
Display
To start
Press key [
]
[ 0 ]
Touch the key
Press key [
]
Nothing or [ H ]
•
Start-up/ switch off a heating zone :
Action
Control panel
Display
Increase power
Press key [ + ]
[ 1 ] to [ 9 ]
Decrease power
Press key [ - ]
[ 9 ] to [ 1 ]
Stop
Press simultaneous [ - ] and [ + ]
[ 0 ] or [ H ]
or press keys [ - ]
[ 0 ] or [ H ]
If no action is made within 10 seconds the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [
]. This symbol disappears
when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows
[
]. The symbol [
] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like noodles cooking.
•
Start up / Stop the booster function :
Action
Control panel
Display
Increase power
Press key [ + ]
[ 1 ] to [ 9 ]
Start up the booster
Press key [ + ]
[ P ] during 10 min
Stop the booster
Press key [ - ]
[ 9 ]
Summary of Contents for APIND638
