25
Power limitation configuration
Before beginning the procedure:
•
Make sure there is no more pot on the hob.
•
Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off.
•
Reconnect the table to the grid.
•
Start the procedure within 30 seconds after reconnecting the hob to the grid.
•
Unlock the hob.
•
Make sure all cooking zones are off.
To configure the power limit:
1) Press at the same time the left and right end zones [ + ] and [ - ].
A beep will sound and the current power is displayed.
2) To set the power limitation use the [ + ] and [ - ] of the left zone. To exit the procedure without
saving your changes, don’t touch any key for 60 seconds.
To save the new power limitation, re-press at the same time the left and right end zones [ + ] and [ - ].
Summary of Contents for APIND638
