© MOBATIME
18 / 52
801317.00
4
Control of the clock using IR remote control
A 2-digit address is assigned to the clock. With the IR remote control the clock can be locked.
The setting of time, date and the clock parameters can only take place at clocks in an
unlocked state.
Function of the pushbuttons in normal display mode
pushing
F1
+ entry of 2-digit address,
unlock the clock with the
using numerical pushbuttons
corresponding address
holding down
F1
button
unlock all clocks within the reach of the IR
beam of the remote control unit
holding down
F2
button
lock all clocks within the reach of the IR
beam of the remote control unit
holding down
F3
button
display the address of all locked clocks within
the reach of the IR beam of the remote control
Function of the pushbuttons in the “Clock“ operation mode
SET
entry into the time and date setting mode
The
+
button
button brightness increase (not applicable when
P0
is set to
A
)
The
-
button
button brightness decrease (not applicable when
P0
is set to
A
)
DATE
visualization of time + date
TEMP
visualization of time + temperature
TIMER
visualization of stopwatch
>>
changeover of the displayed items:
time + date
→
time + temperature
→
stopwatch
→
time + date
MENU
entry into the menu of setting of clock
parameters
CLR
time correction to the whole minute (±30 sec)
4.1
Setting of time and date
Press
>>
to move to next value. The item to be set is blinking. The time and date
values are adjusted in the following sequence: year
– day – month – hours – minutes.
By pushing the
SET
button, enter the time and date setting mode.
The display shows the following:
The item to be set is blinking.
After having set up the minutes the value is blinking. By pushing the
OK
button the
value is stored (with seconds reset to zero) and the clock operation resumes. The clock
returns into normal working mode.
Note: When the time zone of displayed time and date (menu item P7) is set to the
values U1
– U7 or U, the entered time and date is taken as UTC.
Summary of Contents for ECO-M-DK
