© MOBATIME
19 / 52
801317.00
Function of the pushbuttons in the “Time and date setting mode”
The
+
pushbutton
increase of the value adjusted, in steps of 1
The
–
pushbutton
decrease of the value adjusted, in steps of 1
Holding down the
+
button
continuous increase of the value set up
Holding down the
–
button
continuous decrease of the value set up
ESC
return into normal display mode, without storage of the
data
>>
move to next parameter
<<
move to previous parameter
CLR
entry of zero or minimum value
OK
storage of values set up and return into normal working
mode, followed with seconds reset
Pushbuttons
0
–9
entry of the corresponding numerical value
4.2
Menu for the setting of the clock parameters
The entry into the menu for the setting of the clock parameters is done by pushing the
MENU
button. The menu is consisted of two pages.
The display shows the following:
The item to be set is blinking.
The options for the parameters to be set up are shown in the menu table on page
(chapter 5).
Function of the pushbuttons in the “MENU mode”
>>
move to next menu item
<<
move to previous menu item
The
+
button
increase of the value adjusted,
in steps of 1
The
-
button
decrease of the current value,
in steps of 1
Holding down the
+
button continuous increase of the value set up
Holding down the
–
button continuous decrease of the value set up
F1
storing of the modified items and
switch to menu page no. 1
F2
storing of the modified items and
switch to menu page no. 2
ESC
return into the normal working mode,
without storing the modified items
OK
storing of the modified items and return
into the normal working mode
SET
enter the sub-menu, where it is possible
Pushbuttons
0
–9
entry of the corresponding numerical value
Note: During entering the numbers in the octets of the IP addresses the editing to the
next digit moves automatically.
Summary of Contents for ECO-M-DK
