7
CODE COMMAND:OPTION
CODE COMMAND
:
OPTION#COMMAND
:
OPTION#COMMAND
:
OPTION
4. CONFIGURATION METHOD
The settings in the Mobeye MS100E can be adjusted by SMS commands. All settings
are stored and will be kept in the unit, even in case the power supplies are removed.
4.1 PROGRAM MODE
As soon as the unit is powered and finished the start-up, the Mobeye MS100E in
program mode and ready to receive SMS commands.
4.2 HOW TO PROGRAM BY SMS
- Be sure the unit has external power and the GSM has network connection
- Send an SMS message with following content:
- The CODE stands for the installation code. F
actory setting is “1111”.
- Do not forget the space between CODE and COMMAND.
- The complete scheme with SMS commands is listed chapter 7.
- The commands are case sensitive.
- Several commands may be combined in one SMS message (with a maximum of 160
characters) by placing a # between the commands.
A confirmation melody is played to indicate a correct command. In the event of an
incorrect command, a beep is heard.
Or: both commands in one message:
Example:
1111 TEL2:+4934578692#CALLALARM:OFF
Example:
To set the SMS to OFF (just call):
1111 CALLALARM:OFF
Example:
To program a telephone number at memory position 2
:
1111 TEL2:+4934578692
Summary of Contents for MS100E
