Using the remote control:
1. Press the button (hold it for a few seconds.) The piston of the mechanism will
begin to move and the scooter will beep.
2. Once it stops beeping, press the button again. The scooter will beep again and
the lever will move until you hear a “click.”
3. Press the button afterwards. The scooter will fold up to the half while it beeps.
4. Once the beep stops, press the button again. The scooter will fold completely
(remember to fold the backrest.)
Using the switch:
1. Press the II sign of the switch (hold it for a few seconds.) The piston of the mecha
-
nism will begin to move and the scooter will beep.
2. Once it stops beeping, press the II sign again. The scooter will beep again and the
lever will move until you hear a “click.”
3. Press the I sign afterwards. The scooter will fold up to the half while it beeps.
4. Once the beep stops, press the I sign again. The scooter will fold completely
(remember to fold the backrest.)
ES
EN
FR
IT
DE
PT
Ulises
Driving
Please unfold the scooter fully according to the instruction (picture 18-21) after you read the
manual.
Unfold the seat to right position, and adjust the tiller for the suitable position, then lock it.
Please seat on the seat and grasp the handlebars, then turn on the power switch.
Press the speed control lever gently by your right thumb.
Brake releases automatically and scooter will move forward (Remark: do not press the
speed control lever too fast)
Pushing right handlebar moves scooter turn left when operating.
Pushing left handlebar moves scooter turn right when operating.
Steering the handlebar in the middle, scooter will move in forward direction.
Release the speed control lever, until scooter has slowed down or fully stopped.
Brake can be automatic locked when scooter fully stopped.
·
·
·
·
·
·
·
·
·
Finish Operating
Make scooter fully stopped
Off the switch and remove the key or press the rocker switch “OFF”.
Get down scooter in safety.
Fold the scooter according to the instruction: pictures FIG.22 to 25.
·
·
·
·
·
·
·
·
Basic Troubleshooting
Please check the key is inserted into the switch /rocker switch, and keep it “ON”.
Check it if the battery is fully charged or not. (Refers to “6. Battery and Battery
Charging”)
If the battery capacity is insufficient, please increase the charging time/ cycles.
(Refers to “6. Battery and Battery Charging”)
If the issue continues, then battery capacity testing is needed.
·
·
Scooter can not work continually when you are driving it
Battery line is loose.
Motor carton bush is damaged.
·
·
Speed suddenly slows down when driving
Battery capacity is insufficient.
Battery aging.
38
