background image

14

Issue 2020-09 REV1

     3)If the wheelchair is not used for a long time, turn off the battery power, the power switch is 

installed on the battery shell. 

5.3. How the battery is charged 

     After the battery is used for a period, the electric quantity of the battery shall be timely 

checked, when the electric quantity is unsaturated or less, the battery shall be timely charged, 

and otherwise, the wheelchair will not run normally. Charging steps: 

     1)The user shall confirm that the power of the electric wheelchair has been closed. The user 

shall place the charger, turn off the power switch on the charger, insert the charging plug of the 

charger in the charging socket of the controller, insert the other end in the domestic power socket 

hole, open the power switch after being connected, the red light is on, it means that the charger 

has entered the charging mode, when the orange light is on, it means that the battery is being 

charged. The orange light becomes green light when the power is saturated. 

     2)If the internal battery is replaced, contact the manufacture. 

     3)After the battery is fully charged, unplug the AC input power plug, and then unplug the DC 

charging connecting plug, and complete the charging. 

5.4 After the main power switch is opened, if the red light is not on, the user shall check whether 

the power plug is plugged well, and otherwise, the fuse is burnt out; 

5.5 The charging time is 6-8h in general.

Transportation condition and storage environment 

     The wheelchair is packaged with the kraft material to prevent from being sprayed with water, 

top pressed by hard object, and be transported by sea, air and land. 

     The product is stored in: (-5°C-40°C temperature, 10%-80% humidity) shady and cool, dry, 

ventilated and corrosive gas-free place. It cannot be exposed under the direct sunshine and 

mixed with the flammable and explosive substances, and otherwise, the product performance 

may be reduced or damaged.  

The battery must be protected at the frozen temperature, the frozen 

battery cannot be charged, and otherwise, the battery will be damaged, 

and the personal injury will be caused. 

If the electric wheelchair is not used for a long time, the battery may 

have been frozen. If the wheelchair is used again, it cannot be charged 

in a hurry. The battery shall be warmed and continuously placed 

in room 

temperature 

for several days before charging.

Summary of Contents for M7110





















Reviews: