V18.4
Art. No: MH-BA-25
Page 10
•
Tap on the temperature selector switch (Fig. 6, Section 3.3.3) to display the
target temperature and the remaining running time of the program.
(Figure 6)
•
If one of the selected heating programs is manually interrupted, the
program is stopped and starts from the beginning.
•
If a heating program is active, the display alternates between
"PR"
and the
boiler temperature
.
•
You
cannot
intervene in the program sequence.
•
In case of power failure, the current point within the heating program is stored
for one hour. If the power supply is active again, the heating program
automatically resumes from this point.
•
Manual heating mode
•
Switch on the device.
•
Press the temperature selection button up or down for 5 seconds until the
temperature indicator on the display flashes. (Fig. 7, Section 3.3.3)
•
Set the desired temperature using the temperature selection button.
(Figure 7)
