background image

Welcome

Welcome

Welcome

In the Box

In the Box

In the Box

Getting Started

Getting Started

Getting Started

Welcome 

Thank you for your purchase of the Mobile Crossing CompactFlash 
GPS receiver. This GPS receiver will work world wide to compute 
your position wherever you are. It outputs standard NMEA sentences 
and will work with just about every navigation program available. The 
unit plugs into a CF slot in your PDA or laptop and uses power from 
this connection so no separate power is required. Laptops with a 
pcmcia slot can use a simple adapter to support this unit. Laptop 
users will need the driver included on the CDROM, but PDA users 
will generally find that the drivers are already included in their device. 

In the Box 

The Box contains: 

 

The CompactFlash GPS Receiver 

 

A CDROM containing Test Programs & Drivers 

 

This Manual 

Getting Started 

The GPS Receiver has a built-in GPS antenna. It supports an 
external antenna as well using an MMCX connector. There is one 
lamp that indicates power is being received by the unit. When a fix is 
available on the GPS receiver the lamp will blink. 

Summary of Contents for COMPACTFLASH GPS















Reviews: