Safety Precautions
WARNING
During a cutting or plotting operation, do not touch
the writing panel or moving parts such as the carriage.
•
Such action may cause human injury.
Be sure to ground the earth terminal.
•
If the cutting plotter is not grounded, the operator
could
suffer an electrical shock in case of current leakage.
Keep your hands, hair, etc. away from the writing panel
and moving parts such as the carriage even if the
cutting plotter is stopped, because it may suddenly start
moving when data is received.
•
Such action may cause human injury.
Do not disassemble, repair, or remodel the cutting plotter.
•
Such action may cause electrical shock or a fire
hazard due to current leakage.
•
Contact with the high-voltage parts within the cutting
plotter may cause electrical shock.
•
If the cutting plotter requires repair, contact your
Partner Success Manager or return the entire machine to
Mobile Outfitters.
Do not connect the cutting plotter to a non-rated power
supply.
•
Use of a different supply voltage may result in electrical
shock or a fire hazard due to current leakage.
No touching
Ground the Plotter
Prohibited
No touching
No Disassembly
