3
1. Attaching a Tool
Attach a tool (cutter plunger, plotter pen) to the plotter.
Attaching a Tool
When mounting the tool in the tool holder, please note the following.
•
3XVKWKHWRRODOOWKHZD\LQWRWKHKROGHUXQWLOLWVÁDQJHFRQWDFWVWKHXSSHUSDUWRIWKHKROGHUDQGWKHQWLJKWHQWKHVFUHZ
ÀUPO\
•
7RSUHYHQWLQMXU\DYRLGDEVROXWHO\WRXFKLQJWKHWRROLPPHGLDWHO\DIWHUWKHFXWWLQJSORWWHULVWXUQHGRQRUZKHQHYHUWKHWRRO
is moving.
)RUGHWDLOVVHH´$WWDFKLQJD7RROµRQLQ8VHU·V0DQXDO
It is explained here using cutter plunger as an example.
CAUTION
:KHQSXVKLQJWKHWRROKROGHUZLWK\RXUÀQJHUVWKHEODGHWLSPD\EHSURWUXGLQJ7DNHFDUHQRWWRFXW\RXUÀQJHUV
Supplement
•
When using with half cutting and plotter pen, set the seal in Tool Holder 1 (backward), and when using cutting out (perforated cut), set
the seal in Tool Holder 2 (forward).
•
Cutting out means that the media is cut out completely.
•
+DOIFXWWLQJPHDQVWKDWRQO\WKHPDUNLQJÀOPLVFXWRXWOHDYLQJWKHEDFNLQJVKHHWXQFXW
1
Loosen the tool holder screw.
Tool holder
Bracket to hold tool
Bracket to hold tool
Tool holder
Top
Supplement
When using with half cutting and plotter pen,
set the seal in Tool Holder 1 (backward), and
when using cutting out (perforated cut), set the
seal in Tool Holder 2 (forward).
2
:KLOHSXVKLQJXSWKHWRROKROGHUSXVKXQWLOLWVÁDQJHFRPSOHWHO\WRXFKHV
the upper part of the holder.
Flange
Bracket to
hold tool
Tool holder 1
(Backward : Half cutting/Plotting Pen)
Tool holder 2
(Forward : Using
cutting)
Tool holder
Setting up the Plotter main unit
2
Plugging in
& Powering up
Once the RapidCut system is unpacked, rotate the tablet perpendicular to the cutting
machine, as shown below. This exposes the USB port for connecting the tablet to the
cutting machine
