WWW.MOBILEWARMING.COM
Charging Instructions
To ensure the best battery performance and a
long battery life follow these steps.
Battery Port
Charger Port
MW37V22
7.4volt 2200mAh
Lithium-Ion
ASA16U08
• Output: DC 4.2v, 0.75A
• Input : AC 100v-240v
Replacement or additional batteries and chargers available at
www.mobilewarming.com
Plug Mobile Warming charger into AC wall
socket and connect battery(s) to AC charger
connectors.
When indicator light(s) are “Red” battery(s) are
charging.
When indicator light(s) turn “Green” battery(s)
are fully charged and ready for use or storage.
Always charge batteries indoors.
Always use compatible Mobile Warming
Chargers to charge batteries. Failure to do so
could result in bodily injury, fire, or damaged
batteries.
•
•
•
•
•
Always disconnect and remove MW battery(s) from the garment(s) power
lead wiring harness.
Do not machine tumble dry, iron, or dry clean.
Do not wring out the garment(s) as this may cause damage to the heating
elements and or wire harness.
Do not fully submerse in water or other liquids.
Please charge the battery fully before use.
If problems with the battery occurs refer to caution label marked on battery
case or contact us at www.mobilewarming.com
Care Instructions
•
•
•
•
•
•
CAUTION
•
•
•
Only charge your battery with included compatible wall charger. Go to
www.mobilewarming.com/pages/battery-care for more information.
It is important to maintain at least 25% of your battery power when not in use.
Failure to do so will result in performance issues and reduced battery life. We
recommend to charge your batteries every 3 months.
Recommended power settings of 50% is sufficient for temperatures between
50°-64°F (10°-17.7°C) while at lower temperatures setting the power at 75%
or 100% is sufficient. It is not recommended to use 100% power setting for a
long time as it may cause overheating and /or bodily discomfort.
