WWW.MOBILEWARMING.COM
Charging Instructions
To ensure the best battery performance and a
long battery life follow these steps.
Battery Port
Charger Port
MWV52
12volt 5200mAh
Lithium-Ion
ASA16U17
• Output: 12.6v, 1.6A
• Input : AC 100v-240v
Replacement or additional batteries and chargers available at
www.mobilewarming.com
Plug Mobile Warming charger into AC wall
socket and connect battery(s) to AC charger
connectors.
When indicator light(s) are “Red” battery(s) are
charging.
When indicator light(s) turn “Green” battery(s)
are fully charged and ready for use or storage.
Always charge batteries indoors.
Always use Mobile Warming Chargers to charge
batteries. Failure to do so could result in bodily
injury, fire, or damaged batteries.
•
•
•
•
•
Always disconnect and remove MW battery(s) from the garment(s) power
lead wiring harness.
Do not machine tumble dry, iron, or dry clean.
Do not wring out the garment(s) as this may cause damage to the heating
elements and or wire harness.
Do not fully submerse in water or other liquids.
Please charge the battery fully before use.
If problems with the battery occurs refer to caution label marked on battery
case or contact us at www.mobilewarming.com
Care Instructions
•
•
•
•
•
•
CAUTION
•
•
It is important to maintain at least 25% of your battery power when
not in use. Failure to do so will result in performance issues and
reduced battery life. We recommend to charge your batteries every
3 months.
Recommended power settings of 50% is sufficient for temperatures
between 50°-64°F (10°-17.7°C) while at lower temperatures setting
the power at 75% or 100% is sufficient. It is not recommended to use
100% power setting for a long time as it may cause overheating and
/or bodily discomfort.
INPUT
12
.6V1
.6A
O
UT
PUT 9-1
2
.6V
M
AX5A
USB O
UTPUT
DC5V
M
AX2
.1
A
