2
Scanner only assembly for Surface Go
©2021 MobileDemand, LC | All trademarks are property of their respective owners.
1 - Shown are the parts included in the Scanner Only Kit
SG-SCN-ONLY-KIT-DFS.
2 - Install Tablet into the Case per instructions included with Case.
Make sure the Scanner USB PCB does not extend into Case.
3 - Remove M3 x 8 & (2) M3 x 10 Flat Head screws.
Remove and keep M3 x 8
mm long Flat Head screw.
Remove and keep (2) M3 x 10
mm long Flat Head screws.
