background image

MobileHelp Customer Support 1-877-827-6207

16

Testing your Cellular Duo System

It is important that you test your system at least once a month.

When you are conducting a test on your Cellular Duo System, always have your Mobile 

Device nearby because if both devices activate in response to your press of a Neck 

Pendant or Wrist Button, each device will send an alarm to the Emergency Response 

Center and you will need to reply to the operator to clear the alarm.

You can use the TEST button on your Cellular Base Station to conduct a test without 

placing a call to the Emergency Response Center by following these steps.

 

- Press and hold the TEST button on Base Station until it illuminates green.

 

- You will hear an announcement over the Base Station that will instruct you to press 

the Emergency button or Pendant.

 

- Press the Neck Pendant or Wrist Button.

 

- The Base Station will announce, “Test call sent to emergency response center” and 

the Mobile Device will respond by either beeping several times or by playing the 

announcement, depending upon the Mobile Device version.

 

- If your test was successful, you will hear “thank you for testing your device” from the 

Base Station and Mobile Device.

Summary of Contents for CBS4-01





































Reviews: