MobileHelp Customer Service 1-877-827-6207
10
MHP8003-359B
Cellular Base Station Voice Guidance
If your system includes the Cellular Base Station, your Base Station will have voice
announcements. Select announcements are listed below:
Event
Voice Prompt
Notes
The Cellular Base
Station is powered on
System Ready
Base Station ON/OFF switch has been turned on, be sure to
connect to electric outlet or it will run on battery backup.
Both red emergency
and blue reset buttons
are flashing
Power not detected
or Power detected
(when electricity is
reconnected)
Check that the Base Station is correctly plugged
into an electrical outlet.
The battery needs
charging
Low Battery
Check that the Base Station is correctly plugged into an
electrical outlet or it will run on battery backup.
The emergency call is
initiated
Call in progress
Alarm is being sent to the Emergency Response Center.
Call connected
Please stand by for
operator
Respond to the Emergency Operator’s call over
the device speaker.
Cellular Base Station
receives a fall signal
Fall Detected - Press and
hold Button to Cancel
This will occur for about 20 seconds and will allow you time to
cancel the alarm. During this time, you may press and hold the
button on the Fall Button for 5 seconds to cancel the signal.
Fall alarm is canceled
Alarm Canceled
Alarm has been canceled.