Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Set up description
Check with the list from above if nothing is missing. If you’d discover at that stage that
some part is missing or damaged, do not continue assembly process. Contact your supplier
of the product right away.
Put the rollator with it's wheels on the foor.
Grab both seat tubes and simultaneously push them down until you’ll hear the “click”
sound of locking mechanism of the frame in open position. Try to pull frame folding strip up
to fold the frame. If it is impossible to do, the frame is opened and secured correctly. See
the rollaror in “OPEN” status in the fgure above.
Always ensure the frame is stable and fxed when the rollator is opened.
Adjust both push handles to the same height. Usually the correct setting is adjusted if the
handles are on the level of user's wrists when standing with arms down along the body.
Loosen fxing levers located under the push handles. Then set the handles to required
height. Both handles should be set to the same height. Tie the fxing knobs on the handle
tubes.
Make sure that the fxing levers (2 pieces) are securely locked so that the rollator is stable
and parts can not move when forced.
Always test to see that the rollator and attachments are properly and safely locked in place
BEFORE using.
Failure to follow these warnings can result in personal injury.
Folding description
To fold the rollator press down with your right hand frame lock lever located under the right
seat tube (see picture). At the same time pull the frame folding strip up. The rollator should
fold amost automatically.
You can secure the device in folded position with folded frame hook placed at the rear end
of right seat tube. Attache loose end of the hook to the left seat tube. Before opening the
rollator back you must unattach the folded frame hook.
Function description
Adjust the height of the push handles so that when the user’s arm is down along the body,
the supports are at wrist height. Adjust the height by releasing the fxing knob located
under the handle tube. Then adjust handles to your desired height, then tie the fxing knob
securely. Repeat the steps for the other support, so both are at the same height.
Care should be taken to ensure that ALL adjustments are secured and that castors and
moving parts are in good working order before using.
Rev. 03/18
Page 3 of 5
UM-312075-77-GB
Backrest
Shopping
bag
Front
rotating
castors
Push handle
Brake handle
Seat with tray
Handle height
adjustment
fxing levers
Rear wheel
a better life in motion
