Using Your Lite
Gait®
Control Unit
The control unit for your
LiteGait is a single channel
battery powered control box.
Charging LiteGait® Battery with
Charging Station
How to Adjust Yoke Height
The LiteGait
®
powered actuator column is raised
and lowered by a hand switch with two up and
two down arrows.
Raising the Yoke
Verify that LiteGait
®
has clearance above the yoke.
Depress the button with the up arrow on the
hand switch. Release the button when the yoke is
at the desired height.
Lowering the Yoke
Verify that LiteGait
®
has clearance below the yoke.
Depress the button with the down arrow on the
hand switch. Release the button when the yoke
lowers to the desired height.
Raised
Lowered
Emergency Lowering of Yoke
If the down buttons fail to lower during normal use
due to a low battery or bad hand connection, there
is an yellow auxiliary down button on the bottom
face of the control box that can be pressed to
lower the device.
CAUTION: Using the Emergency Down Button may
damage battery for future use. Use only in case of
emergency.
Rechargeable Battery
Emergency Stop Button
Control Box
Lite
Gait®
is equipped with a 24 volt battery pack that
needs to be charged on a weekly schedule. To
recharge your battery follow the steps below.
1.) Charging Station should be
securely anchored on a wall or
placed on a counter in proximity
to a power outlet. Connect
charging station to power outlet
via charging adapter port.
Hand Switch Port
Actuator Cord Port
